Loctite 242 Vs 243

March 26, 2024 Post a Comment

Loctite 242 vs 243

LOCTITE® 243™ Primerless, Oil Tolerant, Medium Strength, Removable Blue Threadlocker is an oil tolerant, removable, medium strength, blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4″ and 3/4″ (6 to 20 mm).

Which is stronger Loctite 222 or 243?

Our range of threadlocker strengths include: LOCTITE® 222 – A low-strength purple threadlocker. Works on all metals and is especially good for applications that may require disassembly. LOCTITE® 243 – A medium-strength blue threadlocker that offers a good general-purpose solution to seal and secure assemblies.

What is threadlocker 242 used for?

Typical Use: Used to prevent loosening and leakage of threaded fasteners. Particularly suitable for applications such as pump or motor mounting bolts, engine rocker nuts or equipment housing screws, where disassembly with hand tools is required for servicing.

Is Loctite 242 removable?

LOCTITE® 242® Medium Strength Mil-Spec Blue Threadlocker is a general purpose, removable threadlocker for fasteners between 1/4" and 3/4" (6 to 20 mm) diameters.

Where is Loctite 243 used?

LOCTITE 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.

How do you break a Loctite 243?

To remove high strength Loctite thread locker you will need heat, up to 250° C. The heat will soften the thread locker, allowing the bolt to come loose. The bolt will not be damaged. A bolt fixed with medium strength thread locker (such as Loctite 243) can usually be removed with hand tools.

Which Loctite glue is the strongest?

For fast and strong results, use Loctite's 60 Second All-Purpose glue. This versatile and reliable super glue dries transparently and forms long-lasting invisible bonds between metals in just a few seconds.

Is Blue or red Loctite better?

Loctite threadlocker blue is designed to easily be replaceable with common tools, whereas red is a more permanent fix. If you have trouble keeping it straight, here's a helpful rhyme to jog your memory: “Blue, easy to make new. Red, full strength ahead!”

Which Loctite is the strongest?

LOCTITE® red threadlocker is the highest strength of threadlocker adhesive. This product cures fully in 24 hours and is available in both a liquid and as a semisolid anaerobic. The red high strength threadlocker products are so powerful they may require heat to be disassembled.

What does Loctite Blue 242 do?

Loctite® Threadlocker Blue 242® is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures anaerobically, when there is an absence of air between close fitting metal surfaces.

How strong is Loctite 242?

Medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36. LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities.

How long does Loctite 242 take to set?

Fast and easy to use, this medium-strength threadlocker sets in just 10 minutes and fully cures in 24 hours. Loctite Threadlocker Blue 242 is particularly suited for applications on less active substrates such as stainless steel and plated surfaces, where disassembly is required for servicing.

What is the weakest Loctite?

Loctite Purple (222): Low Strength Threadlockers From the lowest side of the spectrum is the Loctite Purple. This strength is perfect for fasteners less than 6mm.

How do you remove Loctite 242?

Cured product can be removed with a combination of soaking in a Loctite solvent and mechanical abrasion such as a wire brush.

Will Loctite work on stripped threads?

Loctite Form-A-Thread Stripped Thread Repair, makes reliable thread repairs without drills, taps, tools, or inserts. Restores worn, stripped or damaged threads and eliminates future corrosion, galling, seizing, and rust.

Does Loctite 243 seal threads?

LOCTITE® 243® is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

What does Loctite 243 Equal?

Truloc 375 50ml (Loctite equivalent: 243): - BearingBoys.

Does Loctite 243 need primer?

Loctite 243 is a medium-strength nutlocker which prevents properly-torqued fasteners from loosening due to vibration, yet allows disassembly with hand tools. But unlike the original 242 formula, 243 Primerless will adhere to inactive metals without the need for primer.

Will wd40 loosen Loctite?

WD-40 can also loosen the hold of strong adhesives such as super glue. So, if you drop some glue on the floor or bench, spray a little WD-40. In no time you'll be able to wipe the glob right of your bench surface.

Does Loctite 243 have a shelf life?

The shelf life period for Loctite® products is one year from date of shipment from Henkel facilities or as indicated by package labeling. For optimal storage, maintain product at a temperature between 8°C (46°F) to 21°C (70°F).